Dr Marco Actis Grande (Politecnico di Torino, Italy)
Dr Paula Alvaredo (Universidad Carlos III de Madrid, Spain)
Dr Volker Arnhold (Powder Metallurgy Solutions, Germany)
Dipl-Ing Claus Aumund-Kopp (Fraunhofer IFAM, Germany)
Prof Thierry Barrière (University of Franche-Comte, France)
Dr Robert Bidulsky (Technical University Kosice, Slovakia)
Dr Pierre Blanchard (Erasteel SAS, France)
Dr Martin Bram (Forschungszentrum Jülich GmbH, Germany)
Prof Christoph Broeckmann (RWTH Aachen IWM, Germany)
Mr Ralf Carlström (Höganäs AB, Sweden)
Prof Efrain Carreño-Morelli (University of Applied Sciences and Arts Western Switzerland, Switzerland)
Dr Ing Riccardo Casati (Politecnico di Milano, Italy)
Prof Francisco Castro (CEIT, Spain)
Prof Ilaria Cristofolini (Trento University, Italy)
Prof Herbert Danninger (Vienna Technical University, Austria)
Dr Gian Pietro DeGaudenzi (FILMS SpA, Italy)
Mr Federico Della Ricca (Hoganas Italia, Italy)
Dr Mark Dougan (AMES SA, Spain)
Dr Thomas Ebel (Helmholtz-Zentrum Geesthacht, Germany)
Ing Matteo Federici (Sacmi Imola SC, Italy)
Dipl.-Ing. Manuel Ferreira (TU Dortmund, Germany)
Mr Philippe François (Rio Tinto GmbH, Germany)
Dr Luz Fuentes (PMG Polmetasa, Spain)
Dr Christian Gierl-Mayer (Vienna Technical University, Austria)
Prof Elena Gordo (University Carlos III of Madrid, Spain)
Prof Hans-Ake Haggblad (Luleå University, Sweden)
Mr Martin Heissl (Miba Sinter Austria GmbH, Austria)
Dr Gemma Herranz (Castilla La Mancha Univ, Spain)
Dr Johan Hjärne (Quintus Technologies AB, Sweden)
Dr Simon Höges (GKN Sinter Metals, Germany)
Dr Bjoern Hoschke (Kennametal Shared Services GmbH, Germany)
Dr Eduard Hryha (Chalmers University of Technology, Sweden)
Dr Inigo Iturriza (CEIT, Spain)
Dr Anke Kaletsch (RWTH Aachen University, Germany)
Prof Bernd Kieback (Fraunhofer IFAM, Germany)
Mr Peter Kjeldsteen (Sintex a/s, Denmark)
Prof Dr Igor Konyashin (Element Six GmbH, Germany)
Mrs Caroline Larsson (Höganäs AB, Sweden)
Mr Christoph Laumen (Linde AG, Germany)
Dr Stefano Lionetti (Centro Sviluppo Materiali SpA, Italy)
Mr Marko Maetzig (ARBURG GmbH + Co KG, Germany)
Dr Bernhard Mais (ECKA Granules Germany GmbH, Germany)
Dr Diego Manfredi (Istituto Italiano di Tecnologia, Italy)
Dr José Manuel Martin (CEIT, Spain)
Prof Alberto Molinari (Trento University, Italy)
Dr Cesar Molins (AMES SA, Spain)
Dr Siavash Momeni (Hilti AG, Liechtenstein)
Dr Steven Moseley (Hilti Corporation, Liechtenstein)
Dr Ing Marco Mulser (Fraunhofer Institut - IFAM, Germany)
Mr Keith Murray (Sandvik Osprey Ltd, United Kingdom)
Dr Stuart Nailer (Hilti Corporation, Liechtenstein)
Mr Wolfgang Pahl (GKN, Italy)
Prof Frank Petzoldt (Fraunhofer IFAM, Germany)
Dr Volker Piotter Karlsruhe (Institute of Technology GmbH, Germany)
Dr Yoko Pittini-Yamada (Meyer Sintermetall AG, Switzerland)
Dr Ilaria Rampin (Pometon SpA, Italy)
Mrs Adeline Riou (Erasteel, France)
Dr Jose Manuel Sanchez (CEIT, Spain)
Dr Ing Thomas Studnitzky (Fraunhofer Institut - IFAM, Germany)
Dr Ralph Useldinger (Ceratizit S.A., Luxembourg)
Prof Maurizio Vedani (Politecnico di Milano, Dept. of Mechanical Engineering, Italy)
Dr. Lars Wimbert (GKN Sinter Metals Engineering GmbH, Germany)
Dipl Ing Matteo Zanon (Pometon SpA, Italy)
Dr. Andreas Zeller (GKN Sinter Metals Engineering GmbH, Germany)
Dr Pierluigi Zingale (hGears, Italy)
